| Customization: | Available |
|---|---|
| After-sales Service: | Online Support |
| Warranty: | 1year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Advantages:
Cutting-bit is a kind of wearable part in roadway excavation machinery, roadheaders. It is the main tool for cutting rock and mideral. The pick is made up of a cutter body (cutter / shank) and a carbide cutter. In the actual working conditions, the biggest difficulty in the use of these cutting picks is the carbide tip and the cutting tool-to-body welding technology. Most common problems faced are due to low quality welding technology, such as welding coming off, leading to the carbide head cutting away from the body, thus affecting the overall cutting and cutting effect and damaging the main machine. With the introduction of our company's welding process for "tungsten carbide and steel", the cutting-bit wear resistance has seen a qualitative leap and the use of our roadheaders which is equipped with high efficiency cutting parts is safer and long lasting and durable.
1: The feed speed is fast, the service life is long, and the construction cost is reduced;
2: Improve the hardness and wear resistance of the pants by strengthening treatment;
3: The use of ultra-thick granular alloys to greatly improve product performance.
Advantages:
1.High performance& price ratio.
2.Wear-resistant carbide tip for extended tooth life.
3. Strong braze weld for superior tip retention.
4.Specially hardened head for much longer tooth life.
5.Fully ranged products.
(trenching bit teeth, conical bits, bullet teeth, cutter bits, rotary cutter bits, rotary drill bit, carbide bullet teeth)
Model: We can also produce according to your drawings or samples.
Pick for trenching | ||||||
Model | Carbide diameter D1(mm) | D2(mm) | D3(mm) | D4(mm) | Teeth l1(mm) | Total Length L(mm) |
ts30c x | 16-30 | 60 | 30 | 38 | 70-90 | 130-150 |
ts32c x | 16-30 | 60 | 30 | 38 | 75 | 135 |
ts39c x | 16-30 | 60 | 30 | 38 | 73-92 | 133-152 |
Pick for trenching | ||||||||
Model | Carbide diameter D1(mm) | D2(mm) | D3(mm) | h(mm) | l(mm) | Teeth l1(mm) | Total Length L(mm) | |
ts36c x | 16-30 | 38 | 35 | 5 | 70 | 80 | 157 | |
Jixing picks are produced by drawing. The computer calculates the weight of the pick and then cuts it. After extrusion by warm extrusion technology, there is no flash burr and no oxide scale. The material utilization rate is over 95%.
The picks are made by temperature extrusion technology. The temperature is extruded at a metal recrystallization temperature. The forming temperature is about 600-800 degrees Celsius. In this temperature range, the metal no longer produces oxidation and grain length. Large forging defects can occur in the process of deformation and recrystallization, accompanied by partial normalizing process, which can significantly change the metallographic structure of the tooth body, refine the grain and improve the impact toughness of the pick.
Q: Do you accept sample order?
A: Of course, please contact us for details.Give us your model/quantity, and your other requirement.
){kind=link}